CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

How to get results on specific area

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 20, 2016, 01:59
Default How to get results on specific area
  #1
New Member
 
tato
Join Date: Jul 2009
Posts: 13
Rep Power: 10
moca is on a distinguished road
Sponsored Links
Dear colleagues,

How to get pressure information/results on specific area? Please refer to attached picture. I need to know pressure on each hole no.1, 2, and 3.

Thank you in advance for your help.

Regards,
C.Moca
Attached Images
File Type: png Screen plate.png (42.8 KB, 6 views)
moca is offline   Reply With Quote
Sponsored Links

Old   July 20, 2016, 02:07
Default
  #2
Senior Member
 
Maxim
Join Date: Aug 2015
Location: Germany
Posts: 374
Rep Power: 4
-Maxim- is on a distinguished road
in Post create a plane for each of the holes and evaluate your pressure etc on/through those planes.
-Maxim- is offline   Reply With Quote

Old   July 20, 2016, 06:38
Default
  #3
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 13,651
Rep Power: 105
ghorrocks is a jewel in the roughghorrocks is a jewel in the roughghorrocks is a jewel in the rough
Or if a point measure of pressure is OK then put a monitor point on it (if you are in the solver) or a point on it (if you are in CFD-Post). This is simpler than planes, but only gives you pressure at a point.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Non overlap area fractions saisanthoshm88 CFX 11 September 17, 2015 18:42
tet results vs hex results sivakumar OpenFOAM Running, Solving & CFD 0 March 4, 2014 11:15
results in a specific point rcerdeira FLUENT 1 February 21, 2011 15:27
area weighted mass fraction-different results for different grid types Lilly Main CFD Forum 0 February 13, 2011 12:43
How to output results for specific elements - HELP Dan FLUENT 0 January 16, 2009 09:38

Sponsored Links


All times are GMT -4. The time now is 09:21.