how to setup radiant heating in CFX-PRE

qihongming · October 11, 2016, 21:11

Hi,everybody:
One coil pipe will be inserted in oven, the inner surface of oven will apply 50000W/m2, Heat will be radianted from inner surface of oven to coil pipe, the nitrogen gas will flow through the coil pipe.
I'd appreciated if you tell me how to setup in CFX-pre.

ghorrocks · October 11, 2016, 23:00

The fluids setup should be straight forward. The radiation model looks like a case for the discrete transfer model.

There are examples of how to set these models up in the CFX tutorials and further examples in the ANSYS customer webpage.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
only 1 of many named selections not showing up in cfx pre	mihirbhagat	CFX	2	April 26, 2019 04:56
Setting Pressure Boundary Conditions in ANSYS CFX Pre	saisanthoshm88	CFX	21	February 22, 2017 16:50
define a parameter in cfx pre and use it in design modeler	OmidOmid	CFX	3	December 3, 2014 09:09
Error in CFX (after setup process)	Milvus	CFX	2	September 16, 2013 07:50
Error in CFX (after setup process)	Milvus	CFX	0	May 14, 2011 11:51

October 11, 2016, 23:00		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	The fluids setup should be straight forward. The radiation model looks like a case for the discrete transfer model. There are examples of how to set these models up in the CFX tutorials and further examples in the ANSYS customer webpage.