CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

total pressure is less than static pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 12, 2016, 02:52
Default total pressure is less than static pressure
  #1
Member
 
Alex
Join Date: Feb 2016
Posts: 81
Rep Power: 8
Red Ember is on a distinguished road
Hello!
I try to simulate 7-staged axial compressor and faced such misunderstanding: relative total pressure averaged on one face is lower than static one. Here is an example from CFX-POST:

Mass Flow Average of Pressure on S1 R2 Side 2
124181 [Pa]
Mass Flow Average of Total Pressure on S1 R2 Side 2
118307 [Pa]
Mass Flow Average of Total Pressure in Stn Frame on S1 R2 Side 2
146452 [Pa]

Why does it happen? Any calculation details?
Red Ember is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Case of fixed inlet total pressure and fixed outlet static pressure Sunxing OpenFOAM 8 September 9, 2019 05:56
waveTransmissive: does fieldInf fix static or total pressure? Intrepid OpenFOAM Pre-Processing 0 March 31, 2014 12:15
Maintaining Static Pressure at Fluid Flow Inlet cdevalve FLUENT 3 January 14, 2012 00:11
Boundary Conditions : Total Pressure or Velocity Gearb0x OpenFOAM Running, Solving & CFD 2 February 28, 2011 21:18
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 05:13


All times are GMT -4. The time now is 19:36.