Fan boundary condition in CFX?

agastyamit · January 14, 2012, 13:11

Hi
can anyone please tell me how can i implement a fan boundary condition (as is present in Fluent) in CFX?

and also is it somehow possible to implement it somewhere in the fluid domain?

Thanks

ghorrocks · January 14, 2012, 19:02

The fan BC will just be some function of velocity and pressure and you can impose this as a CEL expression.

There has been plenty of posts on the forum about how to implement fan curves, this may be of use.

neha03sharma · November 21, 2016, 13:05

Hello Glenn,

I have to model a fan inside a domain in cfx. can you please send the link of post where I can find more information about fan curves

ghorrocks · November 21, 2016, 15:55

Have you googled fan curve?

neha03sharma · November 30, 2016, 13:31

Hello Glenn,

I looked for the material available online. I am able to simulate the fan, however my fan is not aligned to any global co-ordinate but is rotated about x axis. So, while adding the momentum term, I should add components in both y and z directions proportional to the angle that fan axis make with z and y axis?

ghorrocks · November 30, 2016, 17:17

Then you simply work out the components in the xyz axes. This is basic vectors.

Antanas · December 1, 2016, 07:30

Quote:

Originally Posted by neha03sharma

Hello Glenn,

I looked for the material available online. I am able to simulate the fan, however my fan is not aligned to any global co-ordinate but is rotated about x axis. So, while adding the momentum term, I should add components in both y and z directions proportional to the angle that fan axis make with z and y axis?

Maybe I don't really understand your question, but just in case, you can create additional coordinate system based on your fan and specify velocity relative to it.

January 14, 2012, 13:11	Fan boundary condition in CFX?	#1
agastyamit New Member Amit Agasty Join Date: Oct 2011 Location: CLZ, Deutschland Posts: 15 Rep Power: 14	Hi can anyone please tell me how can i implement a fan boundary condition (as is present in Fluent) in CFX? and also is it somehow possible to implement it somewhere in the fluid domain? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
inlet velocity boundary condition	murali	CFX	5	August 3, 2012 08:56
Boundary Condition in CFX	ssbear	ANSYS	1	February 1, 2011 20:43
asking for Boundary condition in FLUENT	Destry	FLUENT	0	July 27, 2010 00:55
CFX doesn't continue calculation...	mactech001	CFX	6	November 15, 2009 21:25
Fan Boundary Condition	Vijay	FLUENT	0	February 13, 2009 14:45

January 14, 2012, 19:02		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,697 Rep Power: 143	The fan BC will just be some function of velocity and pressure and you can impose this as a CEL expression. There has been plenty of posts on the forum about how to implement fan curves, this may be of use.

November 21, 2016, 13:05		#3
neha03sharma New Member neha sharma Join Date: Oct 2016 Posts: 6 Rep Power: 9	Hello Glenn, I have to model a fan inside a domain in cfx. can you please send the link of post where I can find more information about fan curves

November 21, 2016, 15:55		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,697 Rep Power: 143	Have you googled fan curve?

November 30, 2016, 13:31		#5
neha03sharma New Member neha sharma Join Date: Oct 2016 Posts: 6 Rep Power: 9	Hello Glenn, I looked for the material available online. I am able to simulate the fan, however my fan is not aligned to any global co-ordinate but is rotated about x axis. So, while adding the momentum term, I should add components in both y and z directions proportional to the angle that fan axis make with z and y axis?

November 30, 2016, 17:17		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,697 Rep Power: 143	Then you simply work out the components in the xyz axes. This is basic vectors.