CFD Online Logo CFD Online URL
Home > Forums > CFX

Best Post-Proc Tool?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 24, 2000, 11:16
Default Best Post-Proc Tool?
Michael Bo Hansen
Posts: n/a
Simple question. What is your favorite post-processing tool?

-Michael Bo
  Reply With Quote

Old   October 29, 2000, 19:38
Default Re: Best Post-Proc Tool?
John C. Chien
Posts: n/a
(1). In the past, when I used a solver without a post processor, the FIELDVIEW was the one for 3-D flow field presentation. It is flexible and can do almost everything I wanted to do. (2). For 2-D plotting, and charting, the TECPLOT was used instead of the FIELD VIEW. (3). So, these two codes were used at the same time to do the post-processing. (4). For solvers with integrated graphic processor, it is convenient to use the integrated processor, even though it may not have all the power and features. (5). There are other processors you can use, and I think, it depends on the organization which determines the code you use and the type of problems you are trying to solve. I can only say that the above two codes are good codes for me in the past.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Best post processing tool? cheche Main CFD Forum 0 January 27, 2011 12:02
DPM post proc problem Stel_K FLUENT 1 March 27, 2009 10:42
Pro-vis crashes when Loading results for post proc Dan Main CFD Forum 3 June 23, 2008 10:49
Post processor type tool Mark Main CFD Forum 0 February 7, 2007 09:17
Post Processing in FEM Abhijit Tilak Main CFD Forum 0 April 26, 2004 11:59

All times are GMT -4. The time now is 01:04.