CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Sygnus asks me to establish /tmp

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 7, 2000, 21:23
Default Sygnus asks me to establish /tmp
  #1
sean
Guest
 
Posts: n/a
I've installed cfx4.3 and all of its accessories on Win2000. But when I run it, I find out that cygnus popped out a command windows which says

bash.exe:warning:could not find /tmp,please creat! bash-2.02$

and then I did get into the operating interface of CFX4.3, however, none of the CFX environment, cfx build, or cfx analysis could work.

Would somebody tell me where to create the /tmp?
  Reply With Quote

Old   November 8, 2000, 10:35
Default Re: Sygnus asks me to establish /tmp
  #2
Jan Rusås
Guest
 
Posts: n/a
I don't have Win 2000, but here is what you do on NT, you can check if that works¨ In the control panel - open the system - open environment - click on the lower panel you can then add a variable and value variable TMP value c:\TMP or %Systemdrive%\TMP

Regards Jan
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 00:22.