CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Near-wall grid/meshing problems with CFX-Build

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 18, 2000, 10:18
Default Near-wall grid/meshing problems with CFX-Build
  #1
Mark
Guest
 
Posts: n/a
Hi All,

I am having problems with Build when I want to mesh a surface using mesh seeds with very fine density at a wall boundary. Build meshes the surface, but with the first element out from the wall having no thickness - i.e. the first nodes out from the wall have collapsed down to the wall and subsequently the second element out from the wall is twice as thick as it should be. Has anyone got any suggestions/remedies? Thanks in advance,

Mark.
  Reply With Quote

Old   December 18, 2000, 18:10
Default Re: Near-wall grid/meshing problems with CFX-Build
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi Mark,

Check your equivalencing tolerance. It might be too tight which is collapsing the small elements.

Glenn
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Patches for OpenFOAM 1.7 on MacOS X gschaider OpenFOAM Installation 101 September 21, 2011 06:37
how to specify a wall as porous wall in CFX nagarjuna reddy CFX 3 June 3, 2010 09:03
CFX wall heat transfer coefficient mactech001 CFX 1 January 5, 2010 22:33
Two-phase air water flow problems by activating Wall Lubrication Force challenger85 CFX 5 November 5, 2009 06:44
CFX 5.6 mesh build shhe CFX 1 February 13, 2004 05:27


All times are GMT -4. The time now is 16:38.