CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Advanced Constraint

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2001, 00:13
Default Advanced Constraint
  #1
Monir Hossain
Guest
 
Posts: n/a
Dear Sir,

When I was creating my Furnace Geometry file using CFX4.3 Build, I found problem to create Advanced Constraint. I have to set-up Advanced Constraint while two edges of my Inlet Patch (Child face) coincides with the two edges of the Parent Face.

Can anyone help me to solve this problem? I have checked the on-line CFX Help, was not very effective for me.

Regards,

Monir Phd Student Swinburne University Melbourne, Australia 23 Jan, 2001
  Reply With Quote

Old   January 23, 2001, 05:55
Default Re: Advanced Constraint
  #2
Jan Rusås
Guest
 
Posts: n/a
Dear Monir,

-My first advice is 1) Avoid Constrains - use more blocks (KISS) -Second advice 2) Avoid Constrains - use more blocks (KISS)

If you do not want to follow advice 1 or 2 you can get some help on the CFX community page, where there are some course notes on advanced constrains, which are much better than in the help manual.

You can find the pages from www.software.aeat.com/cfx/ log in on the community (you have to get a password from CFX if you dont already have one) goto the Course Notes -> CFX4 Course Notes -> 5. CFX-Build-Constraints

Regards Jan

  Reply With Quote

Old   January 23, 2001, 11:42
Default Re: Advanced Constraint
  #3
IIN
Guest
 
Posts: n/a
Dear Monir: I absolutely agree with Jan Rusas. My advice is.... avoid constraints, use more blocks. Best IIN
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mykEpsilon - How to set a min/max constraint for a term with units elektra79 OpenFOAM 3 October 12, 2010 19:12
How can I learn advanced parts of OpenFOAM? mmahdinia OpenFOAM 2 August 27, 2009 09:35
Advanced constraint CFX 4.3 user CFX 7 February 22, 2002 11:16
advanced output huwei CFX 1 March 21, 2001 15:43
Advanced Constraints Sudarshan Kumar CFX 2 November 7, 2000 13:56


All times are GMT -4. The time now is 18:15.