CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Gluing problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 15, 2001, 09:42
Default Gluing problems
  #1
Shabah
Guest
 
Posts: n/a
When I created the geo. file by running the analysis on a 3-D geometry, geo. file was created but the blocks are not glued in geo. file
  Reply With Quote

Old   April 22, 2001, 05:34
Default Re: Gluing problems
  #2
Li Xinfeng
Guest
 
Posts: n/a
You Can read "the Problem in creating .geo file", I think you will find how to deal with it.
  Reply With Quote

Old   April 25, 2001, 05:55
Default Re: Gluing problems
  #3
Monir Hossain
Guest
 
Posts: n/a
Sabah, Please check your meshes. If the grids do not match then the blocks will not be glued.

Hope this will help.

Monir
  Reply With Quote

Old   May 8, 2001, 06:47
Default Re: Gluing problems
  #4
joseph
Guest
 
Posts: n/a
hi

while creating blocks ,it should be such that cfx will be able to reblock it into a single block. also the reblock option should be "on".

it all depends on the blocks and the mesh seeding you have given.

another important thing is that while creating geomtries and blocks see that to the maximium they are parametric. it reduces your volume meshing and reblocking time as well.

Regards,

joseph.machnaim
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 6 December 1, 2020 12:12
Needed Benchmark Problems for FSI Mechstud Main CFD Forum 4 July 26, 2011 13:13
Two-phase air water flow problems by activating Wall Lubrication Force challenger85 CFX 5 November 5, 2009 06:44
Some problems with Star CD Micha Siemens 0 August 6, 2003 14:55
Using Fluent for Geophysical Problems Hassid Samuel FLUENT 0 February 23, 2001 07:04


All times are GMT -4. The time now is 06:14.