CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Boundary face

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 17, 2001, 10:44
Default Boundary face
  #1
Alex
Guest
 
Posts: n/a
Hi,

I'm using TASC I would like to know if it's possible to declare any part of a mesh(a surface) as a boundary face. Thx

Alex
  Reply With Quote

Old   August 17, 2001, 13:19
Default Re: Boundary face
  #2
cfd guy
Guest
 
Posts: n/a
Alex,
I'm not sure if I understood your question but, here it goes...
You can define a face (of mesh) by two ways. One way is to use the TascBob3D tool, which you define it using line commands (text mode). And the other way, and the easier one, is to use the region manager in Tascflow GUI... Go to Tools menu and then "Region Manager", in there you can do it interactively by picking up several nodes to define a region. Once you defined a region, you can set a B.C. for it.


Good luck.
cfd guy.
  Reply With Quote

Old   August 18, 2001, 10:23
Default Re: Boundary face
  #3
Alex
Guest
 
Posts: n/a
Many thanks for your answer.

In fact I was a bit upset becausse the geometry I was trying to create was allready existing. In fact I had to append a new grid and the goemetry was a part of this grid. But the BC of that geometry weren't defined.

Here is the way I proceed to solve my problem. In the directory where my first gird is: *using TASCflow* FILE>APPEND GRID --> grd.new *using tascbob3d* SUCCESSFULLY READ X SUBGRID(S) FROM GRD FILE SUCCESSFULLY READ Y INTERFACE(S) FROM GRD FILE
:TASCbob3d{Topology}{1}:g
:TASCbob3d{BlockOff}{2}:e
:enter object label : REGION_4_GRD_NEW
:define region : [xi:yi,xj:yj,xk:yk]:GRD.NEW
:TASCbob3d{BlockOff}{3}
:...
:x(ur choice)
:...
:1(for solid)
:...
:0(to exit)
:TASCbob3d{BlockOff}{6}:q
:TASCbob3d{BlockOff}{7}:w

And it's ok!

My problem remains...Is it possible to append directly the boundary conditions of my GRD.NEW when I append the geometry?

Alex
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 05:57
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 13:06
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 14:11
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 14:00
Boundary conditions? Tom Main CFD Forum 0 November 5, 2002 01:54


All times are GMT -4. The time now is 17:06.