Material definition in ANSYS CFX

vishu343 · April 21, 2017, 15:19

Hello,

I am trying to simulate a heat transfer problem and for that I need to define material in Material tab of ANSYS CFX PRE. The problem what I am facing now is like this.

When I define material in Material tab with its properties it works fine, but when I open domain tab and try to allocate defined material to newly created domain then its not in the list of material library.

I have tried a lot many times even to redefine the material but did not work at all.

evcelica · April 24, 2017, 16:29

Did you pick the right domain type? Solid vs Fluid?

Opaque · April 25, 2017, 00:53

Check the Thermodynamic State is compatible with the domain type you are using. Alternatively, you can unset the Thermodynamic State and it should work with any domain.

vishu343 · April 25, 2017, 04:21

Quote:

Originally Posted by Opaque

Check the Thermodynamic State is compatible with the domain type you are using. Alternatively, you can unset the Thermodynamic State and it should work with any domain.

My domain is Solid. And although I unset thermodynamic status then also I am not able to solve this problem.

Btw thanks for your reply.

Sent from my Hol-U19 using CFD Online Forum mobile app

vishu343 · April 25, 2017, 04:22

Quote:

Originally Posted by evcelica

Did you pick the right domain type? Solid vs Fluid?

Yes my domain is solid and I have selected solid domain in tab.

Sent from my Hol-U19 using CFD Online Forum mobile app

April 21, 2017, 15:19	Material definition in ANSYS CFX	#1
vishu343 New Member Vishal Chauhan Join Date: Jan 2012 Posts: 14 Rep Power: 16	Hello, I am trying to simulate a heat transfer problem and for that I need to define material in Material tab of ANSYS CFX PRE. The problem what I am facing now is like this. When I define material in Material tab with its properties it works fine, but when I open domain tab and try to allocate defined material to newly created domain then its not in the list of material library. I have tried a lot many times even to redefine the material but did not work at all.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with an old Simulation	FrankW	CFX	3	February 8, 2016 05:28
CFX FSI Fatal Error	unbanana	CFX	0	October 3, 2015 06:57
I got code 1 error from ANSYS CFX	zlor1324	CFX	0	March 11, 2014 20:22
Cfx aborted due to unknown errors	AKHILESH S L	CFX	2	October 10, 2013 18:16
CFX bought by Ansys - good or bad?!	Pete	CFX	38	February 21, 2003 08:34

April 24, 2017, 16:29		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,197 Rep Power: 24	Did you pick the right domain type? Solid vs Fluid?

April 25, 2017, 00:53		#3
Opaque Senior Member Join Date: Jun 2009 Posts: 1,944 Rep Power: 34	Check the Thermodynamic State is compatible with the domain type you are using. Alternatively, you can unset the Thermodynamic State and it should work with any domain.