CFX-POST camera views

October 21, 2002, 09:52

Hi,

How do u change the camera view to be normal to an arbitrary plane you have created in CFX POST?

cheers nandu

October 22, 2002, 16:08

I believe that you must change the camera view manually using the mouse. But if you find another way, please tell us.
Regards, cfd guy

October 22, 2002, 17:12

Hi Nandu,

The following CCL defines the camera view. Open a command editor and enter this CCL with the pivot point and Rotation setting you want.

CAMERA:Camera 1
Option = Pivot Point and Rotation
Pivot Point = 5, 0.5, 0.5
Rotation = -90, 0, 0
END

Regards,
Robin

P.S.: To see the CCL for a view, first save the view, then save the state to file and look for the view object in your state file (to make it even easier, save only the Camera object to the state file).

rmn_990 · May 1, 2017, 09:56

in the right bottom corner of the workspace you can see the refrence frame of your case data.
by clicking on each direction of that you can change the direction automatically.

October 21, 2002, 09:52	CFX-POST camera views	#1
Nandu Guest Posts: n/a	Hi, How do u change the camera view to be normal to an arbitrary plane you have created in CFX POST? cheers nandu

October 22, 2002, 16:08	Re: CFX-POST camera views	#2
cfd guy Guest Posts: n/a	I believe that you must change the camera view manually using the mouse. But if you find another way, please tell us. Regards, cfd guy

October 22, 2002, 17:12	Re: CFX-POST camera views	#3
Robin Guest Posts: n/a	Hi Nandu, The following CCL defines the camera view. Open a command editor and enter this CCL with the pivot point and Rotation setting you want. CAMERA:Camera 1 Option = Pivot Point and Rotation Pivot Point = 5, 0.5, 0.5 Rotation = -90, 0, 0 END Regards, Robin P.S.: To see the CCL for a view, first save the view, then save the state to file and look for the view object in your state file (to make it even easier, save only the Camera object to the state file).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX post legend modification	mactech001	CFX	3	December 25, 2011 22:12
CFX Post export problem	jeff_F	CFX	0	August 17, 2009 21:25
CFX Post processing	aditya	CFX	1	July 6, 2008 12:09
Chart Generation in CFX Post	Vadim Baines-Jones	CFX	2	August 28, 2007 09:14
Tecplot for CFX post processing	pantangi goud	CFX	2	August 24, 2005 16:42

May 1, 2017, 09:56		#4
rmn_990 Member Ramin Join Date: Oct 2015 Posts: 33 Rep Power: 10	in the right bottom corner of the workspace you can see the refrence frame of your case data. by clicking on each direction of that you can change the direction automatically.