CFD Online Logo CFD Online URL
Home > Forums > CFX


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 20, 2002, 13:57
Default topology
Jennifer Haque
Posts: n/a

I get this error when trying to mesh a solid -

''Topology error detected in CAD model. CAD edge referenced 4 times by faces. Model invalid for meshing.''

Does anyone know what this means?

  Reply With Quote

Old   March 28, 2002, 12:54
Default Re: topology
Posts: n/a
There is a problem with your domain and subdomain definition. Your probably have two solids in the same domain that touch at an edge. Solids must connect at whole faces. If this is the problem, you can correct it by putting the two solids that touch at an edge in different sub-domains.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Topology change and zone modification WiWo OpenFOAM 0 July 7, 2010 04:35
[ICEM] Building topology command script files Anorky ANSYS Meshing & Geometry 8 January 11, 2010 08:25
how to rebuild the geometry topology starting from the mesh. joegi.geo ANSYS Meshing & Geometry 1 December 2, 2009 00:17
ICEM topology Igor-a CFX 0 July 24, 2008 07:05
Topology SAM FLUENT 2 October 13, 2004 00:01

All times are GMT -4. The time now is 07:36.