CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   CFX-Pre starting problem (https://www.cfd-online.com/Forums/cfx/189868-cfx-pre-starting-problem.html)

Metternich June 29, 2017 05:16
CFX-Pre starting problem
 
Hello guys,

i installed ANSYS 17 on ubuntu 16.04. The installation works fine and i can use ICEM, CFX-Post, TurboGrid, Solvermanager ...
Only CFX-Pre doesn't work.

Everytime i try to start i get following error:

Quote:
Warning: ExternalPhysicsQueries - attempt to register ExternalPhysicsInterface more than once!
Invalid float bound in "PARAMETER VALUE" data for Adaption Target Residual
terminate called after throwing an instance of 'cue::PhysicsException'
what(): Invalid float bound in "PARAMETER VALUE" data for Adaption Target Residual
An error has occurred in cfx5pre:

/usr/ansys_inc/v170/CFX/bin/linux-amd64/PreGui_ogl.exe was interrupted by
signal ABRT (6) and dumped core

Aborting due to unexpected error:
comm::error: GUIInterface::waitInput - Unexpected end of transmission from GUI.
I already tryed deleting .cfx folder, installing libmotif4, editing etc/hosts ... but nothing worked. I really don't understand the error.

Any Help would be lovely.
Thanks

Metternich June 30, 2017 09:46
update:

I am able to start cfx5pre in line mode. But i cant start ist with gui.

cfx5pre -gr mesa

doesn't work too...

pls help. i am totally desperated.

-Maxim- July 4, 2017 02:36
as far as I know, ubuntu is not supported by Ansys. You probably have to be happy that you can start it via command line.
You might have better luck with CentOS. I am running CFX 18.1 in CentOS 7 and it works quite well.

Metternich July 4, 2017 10:08
Why support the most common linux distribution?

Metternich July 5, 2017 12:35
Ok. I installed centOS_1611 but cfxpre got the same error.

Quote:
arning: ExternalPhysicsQueries - attempt to register ExternalPhysicsInterface more than once!
Invalid float bound in "PARAMETER VALUE" data for Adaption Target Residual
terminate called after throwing an instance of 'cue::PhysicsException'
what(): Invalid float bound in "PARAMETER VALUE" data for Adaption Target Residual
Aborting due to unexpected error:
comm::error: GUIInterface::waitInput - Unexpected end of transmission from GUI.
An error has occurred in cfx5pre:

/ansys_inc/v170/CFX/bin/linux-amd64/PreGui_ogl.exe was interrupted by
signal ABRT (6) and dumped core

-Maxim- July 6, 2017 02:39
You tried to open a different model or some tutorial files in PRE, right?! I hope it's not just a problem with your model...

As far as I remember, I didn't have any problems with Ansys 17 on CentOS either but I'm doing pre- and postprocessing in Windows...
I just openend PRE (18.1) in CentOS 7.3.1611 and it doesn't show an error.

Do you have access to Ansys 18.1?
I'm afraid I can't help you more here. I would recommend checking the Linux section of this board and contacting Ansys support.

Metternich July 13, 2017 10:07
Yeah i installed ansys 18 and it worked. But i need to use ansys 17 on cluster. Now i write my .def files on a slow windows machine with 17. But now i can go on...

Fu** ansys. :D

Thanks 4 reply.


All times are GMT -4. The time now is 04:25.