|
[Sponsors] |
September 11, 2002, 08:09 |
CFX 5.5.1 stirred tank and LES problem
|
#1 |
Guest
Posts: n/a
|
Dear Friends, I would like to know if CFX 5.5.1 has any templates in order to model stirred tank reactors. Currently, I am trying to import CFX 4.4 mesh but it can be quite cumbersome. CFX 4.4 had a set of templates which could run a session file to create the stirred tank geometry but I havent seen any examples of stirred tank modelling in the help files in CFX 5.5.1 I would also like to know how can I use LES in CFX 5.5.1. Please let me know. Best regards, Nishant
|
|
September 12, 2002, 18:11 |
Re: CFX 5.5.1 stirred tank and LES problem
|
#2 |
Guest
Posts: n/a
|
LES? Check out http://www.cfd-online.com/Forum/cfx.cgi?read=3272
CSTR's templates? I have never seen them in CFX 5. Does import mesh from CFX 4.4 not work properly? What are the problems? I experienced that importing in CFX 5.5.1 is must faster than in CFX 5.5. No Props. Astrid |
|
September 13, 2002, 08:11 |
Re: CFX 5.5.1 stirred tank and LES problem
|
#3 |
Guest
Posts: n/a
|
Hi Astrid, Thanks very much for your comments and the url. I found out that CFX 5.5.1 does not have any special templates as CFX 4.4 had. Import mesh from CFX 4.4 doesnt work automatically. One still has to alter the geometry i.e. create USER-3D regions around thin surfaces (walls) manually. Only then CFX 5.5.1 considers these as wall regions. If you have experienced otherwise, I would like to know. Nishant
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to obtain turbulent kinetic energy data from LES model of Ansys CFX? | rsin | CFX | 19 | December 29, 2018 05:43 |
DPM particle tracking in stirred tank | parisa- | FLUENT | 1 | August 7, 2012 13:03 |
Stirred tank, TKE, DES, RSM | J. Gimbun | FLUENT | 0 | February 21, 2006 06:57 |