CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Joining solids

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 1, 2002, 17:05
Default Joining solids
  #1
Carola
Guest
 
Posts: n/a
Hi Guys!!. I want to paste two diferents solids through a pipe,that itīs possible?

Thanks
  Reply With Quote

Old   October 2, 2002, 17:00
Default Re: Joining solids
  #2
Robin
Guest
 
Posts: n/a
Yes, if you have the solid modelling license. Otherwise you will have to decompose the solids into surfaces, cut the surfaces appropriately and reassemble a new B-Rep solid.

Robin
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
modeling solids feeding to air flow Angeline FLUENT 3 September 15, 2011 13:48
Import a 3d model (Solids 3d) from autoCad to Phoe Anastasia Phoenics 4 September 28, 2008 14:46
Pro-AM, meshing solids and fluids Jason Siemens 1 July 30, 2007 04:08
Joining Solids II Carola CFX 0 October 7, 2002 11:02
Coupling CFX4 with a solids code Brett Towler CFX 1 September 20, 2000 21:09


All times are GMT -4. The time now is 04:48.