CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

Urgent help please: Oxygen transfer between phase

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 30, 2002, 08:49
Default Urgent help please: Oxygen transfer between phase
David George
Posts: n/a
Hello everybody,

Oxygen bubbles are transported by water in a pipe. Some of oxygen is dissolved into water. Of course gas-liquid two-phase flow model will be used. But how to treat the oxygen transfer between the two phases? Thanks a lot in advance!
  Reply With Quote

Old   September 30, 2002, 16:34
Default Re: Urgent help please: Oxygen transfer between ph
Posts: n/a
You could have a two-phase flow, with the water being made of a multicomponent thread water-air. You must then write a governing equation for the phase exchange (source/sink in cel for example)feeding the water component of the fluid phase... I am sure than you can speak to the CFX support engineer for questions of implementation.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
problems after decomposing for running OpenFOAM 6 December 23, 2015 15:27
About phase change heat and mass transfer Michael FLUENT 2 February 13, 2011 02:49
Oxygen mass transfer lcea CFX 3 February 10, 2010 10:54
oxygen transfer aPpA FLUENT 0 July 19, 2005 10:36
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32

All times are GMT -4. The time now is 22:31.