CONFIGURING RSM for ansys 18.1 ?

urosgrivc · September 14, 2017, 07:59

What has happened to the RSM?

Since Ansys 18 is out I am having problems with how to setup a local queue (have not managed it so far).
I can not solve overnight queues as I could before 18 came out with its "new" RSM.
I would like to solve multiple simulations one after the other on my local machine.

Has anyone managed to make it work? I was brovsing on the web for solutions, and does everything really has to be setup via cmd Comand prompt?
It was working realy good before 18 came out and no cmd comands vere needed.

Thank you for help

problematic part of the queue test;
:
External operation: 'queryQueues' has failed. This may or may not become a fatal error
HpcCommand Failed: queryQueues
Submit Failed
Failed to find cluster queue local
Cluster Job ID is not set. Cannot query cluster.
:

or is it somehow posible to help ourselves vith switch active solution to background?

ghorrocks · September 17, 2017, 20:54

This sounds like a question for ANSYS support.

September 14, 2017, 07:59	CONFIGURING RSM for ansys 18.1 ?	#1
urosgrivc Senior Member urosgrivc Join Date: Dec 2015 Location: Slovenija Posts: 365 Rep Power: 11	What has happened to the RSM? Since Ansys 18 is out I am having problems with how to setup a local queue (have not managed it so far). I can not solve overnight queues as I could before 18 came out with its "new" RSM. I would like to solve multiple simulations one after the other on my local machine. Has anyone managed to make it work? I was brovsing on the web for solutions, and does everything really has to be setup via cmd Comand prompt? It was working realy good before 18 came out and no cmd comands vere needed. Thank you for help problematic part of the queue test; : External operation: 'queryQueues' has failed. This may or may not become a fatal error HpcCommand Failed: queryQueues Submit Failed Failed to find cluster queue local Cluster Job ID is not set. Cannot query cluster. : or is it somehow posible to help ourselves vith switch active solution to background? Last edited by urosgrivc; September 15, 2017 at 02:52.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Code for EARSM by Hellsten and RSM by Manceau, square duct, 2d turbulent channel	Thomas Baumann	OpenFOAM Running, Solving & CFD	14	October 16, 2020 04:11
RSM low Re Stress - Omega convergence issues	Jonathan	FLUENT	1	April 20, 2016 05:33
Diffuser stall with RSM turbulence	kjetil	CFX	8	March 30, 2016 08:50
convergence in rsm	sharath21	ANSYS	0	June 22, 2014 15:12
Divergence while using RSM turbulence model	Bharatt	Main CFD Forum	3	July 23, 2012 05:16

September 17, 2017, 20:54		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	This sounds like a question for ANSYS support.