CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

compressible problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 24, 2003, 05:47
Default compressible problem
  #1
hx
Guest
 
Posts: n/a
Hello, everyone, I am useing cfx 4.4 to simulate the reactor. I want to simulate the solution for different. I use fully compressible flow and use database. I donot know how to set the parameters for these. Who can help me?

Best regards,

Haoxu
  Reply With Quote

Old   February 24, 2003, 13:04
Default Re: compressible problem
  #2
matej
Guest
 
Posts: n/a
Hi,

Maybe if you could be more specific, as what reactor? Is it nuclear one, chemical one?

generaly - if you define SPECIES for reactions (supposing you not model nuclear reactor), and you specify PCP database, than you can set the species with :

>>MATERIALS DATABASE

>>SOURCE OF DATA

PCP

>>FLUID DATA

FLUID 'AIR'

MATERIAL TEMPERATURE 3.0000E+02

MATERIAL PHASE 'GAS'

>>SPECIES DATA

CH4 'METHANE'

MATERIAL TEMPERATURE 3.0000E+02

MATERIAL PHASE 'GAS'

under >>MODEL DATA.

I found it if examples, anyway.

matej

  Reply With Quote

Old   February 24, 2003, 21:18
Default Re: compressible problem
  #3
hx
Guest
 
Posts: n/a
Hello,Matej,

Thank you for your quick and good response. I am simulating spinning basket reactor used for the evaluation of catalyst, a chemical reactor. The medium in the reactor is air, and I use the use database. I want to simulate the situation for reactor in different pressure, such as 2.0Mpa. I set air is fully compressible. Certainly, the density is different, I donot know how to set the parameters for compressible flow, how to set the reference pressure, and how to set the inlet patch. Really thank you again for your help.

best regards,

Haoxu
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Naca 0012 (compressible and inviscid) flow convergence problem bipulsaha FLUENT 1 July 6, 2011 08:51
Problem with LaunderSharma compressible turbulence model wrong formulation luca OpenFOAM Running, Solving & CFD 4 July 3, 2006 07:24
Problem calculate Y in compressible turbulence model luca OpenFOAM Running, Solving & CFD 5 June 1, 2006 06:53
I have some problem about Compressible Cruger FLUENT 4 December 5, 2005 08:05
momentum under-relaxation for compressible flow with SIMPLE Mihai ARGHIR Main CFD Forum 0 April 7, 2000 05:58


All times are GMT -4. The time now is 02:47.