CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Mesh: Fluent -> CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 6, 2003, 09:06
Default Mesh: Fluent -> CFX
  #1
Pawel
Guest
 
Posts: n/a
Hallo,

Have anybody tried to export mesh (made in Gambit) from Fluent to CFX? I tried different translators, but still exists some troubles.

Have you any experience and tips?

Thanks in an advance

Pawel
  Reply With Quote

Old   May 9, 2003, 05:15
Default Re: Mesh: Fluent -> CFX
  #2
Helge
Guest
 
Posts: n/a
1: Assuming that your model has only Tri-, Quad-, Hex-, Tet- or Wedge elements

2: Make sure that you have shell elements (Tri or Quad) attached to every boundary and grid interface. Also make sure that the ID's, families (whatever the name is in Fluent) is distinct for every boundary and interface

3: Hoping that Fluent has a NASTRAN interface, you can export the model in that format.

4: If your Fluent model consists of more than one mesh which are connected via interfaces, export these submeshes seperately.

5: Import the single meshes with CFX-Pre. Boundary, Interface regions and domains will be recognized
  Reply With Quote

Old   May 13, 2003, 10:42
Default Re: Mesh: Fluent -> CFX
  #3
user
Guest
 
Posts: n/a
Hi Pawel,

were you able to import the mesh. If so, let us know, that'll help us too.

Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[ICEM] CGNS mesh failing in CFX siw ANSYS Meshing & Geometry 5 November 23, 2017 20:07
simulating 2D airfoil mesh in CFX iffy ANSYS Meshing & Geometry 7 January 24, 2017 04:05
Comparison of fluent and CFX for turbomachinery Far CFX 52 December 26, 2014 19:11
Import ANSYS CFX Mesh to Fluent Noureddine FLUENT 6 February 11, 2009 13:33


All times are GMT -4. The time now is 07:09.