|
[Sponsors] |
June 24, 2003, 08:52 |
cfxexport # gtmconvert.exe
|
#1 |
Guest
Posts: n/a
|
How come a result file exported in CGNS by cfx5export is incompatible with gtmconvert.exe(cgns->def with physics in an auxiliary def file)???
I get this error message : CFX> %gtmconvert.exe -o StaticMixer_001.cgns S02.def StaticMixer.def Error: ------ Program: gtmconvert Subroutine: Location_check Problem: The supplied CCL is not valid. The location of boundary "StaticMixer Default" is invalid: Region "Solid 1.1" is not recognised. Region "Solid 1.3" is not recognised. Region "Solid 1.5" is not recognised. Region "Solid 1.6" is not recognised. Region "Solid 1.7" is not recognised. Region "Solid 1.8" is not recognised. The location of boundary "in1" is invalid: Region "in1" is not recognised. The location of boundary "in2" is invalid: Region "in2" is not recognised. The location of boundary "out" is invalid: Region "out" is not recognised. ERROR: Unable to write definition file. thanks |
|
June 24, 2003, 10:27 |
Re: cfxexport # gtmconvert.exe
|
#2 |
Guest
Posts: n/a
|
In Fact it works even if it gives a message error.
|
|
June 24, 2003, 11:31 |
Re: cfxexport # gtmconvert.exe
|
#3 |
Guest
Posts: n/a
|
sorry again,
I was wrong : It really doesn,t work --> it doesn't update the mesh... |
|
|
|