CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

cfxexport # gtmconvert.exe

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 24, 2003, 09:52
Default cfxexport # gtmconvert.exe
  #1
Bony Quach
Guest
 
Posts: n/a
How come a result file exported in CGNS by cfx5export is incompatible with gtmconvert.exe(cgns->def with physics in an auxiliary def file)???

I get this error message :

CFX> %gtmconvert.exe -o StaticMixer_001.cgns S02.def StaticMixer.def

Error: ------

Program: gtmconvert Subroutine: Location_check

Problem: The supplied CCL is not valid.

The location of boundary "StaticMixer Default" is invalid: Region "Solid 1.1" is not recognised. Region "Solid 1.3" is not recognised. Region "Solid 1.5" is not recognised. Region "Solid 1.6" is not recognised. Region "Solid 1.7" is not recognised. Region "Solid 1.8" is not recognised.

The location of boundary "in1" is invalid: Region "in1" is not recognised.

The location of boundary "in2" is invalid: Region "in2" is not recognised.

The location of boundary "out" is invalid: Region "out" is not recognised.

ERROR: Unable to write definition file.

thanks
  Reply With Quote

Old   June 24, 2003, 11:27
Default Re: cfxexport # gtmconvert.exe
  #2
Bony Quach
Guest
 
Posts: n/a
In Fact it works even if it gives a message error.
  Reply With Quote

Old   June 24, 2003, 12:31
Default Re: cfxexport # gtmconvert.exe
  #3
Bony Quach
Guest
 
Posts: n/a
sorry again,

I was wrong : It really doesn,t work --> it doesn't update the mesh...
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 14:18.