Hello users, i will be greatful to ur contribution if u will tell me the procedure of importing the mesh from fluent ot CFX along with all the boundary conditions,thanks in advance.

Hi Sam,

You should be able to export the mesh to a format which CFX-5 can import. If you have ICEM-CFD, you can import the mesh into MED and export a CFX-5 mesh.

This will only provide you with the mesh and 2D/3D regions. Since boundary condition specification is code dependant, you will have to re-apply your boundary conditions in CFX-5.

Regards, Robin

Sam,

You have a few options...

1) In the fluent post processor export a patran neutral file. You can then read this into CFX-Build and apply boundary conditions. This is not a workable solution if you have a large grid (i.e. >1,000,000 cells).

2) If you are smart, motivated, and have the Fluent documentation of their file format, then you can write a user defined import executable in CFX-5. The doc for this on the CFX side is in the CFX-5 manuals.

Neale

Are you unhappy with the Fluent results or just curious as to what the results would be in CFX?