Moving solid

August 28, 2003, 10:29

Can anybody tell me if it's possible to model a moving solid inside a fluid domain in CFX-5.6?

The actual flow situation involves the emtying of a conical shaped reservoir filled with a mixture of water and sludge particles. The reservoir is emptied by pulling a solid plug from the bottom and up into the reservoir.

Regards Jesper

August 28, 2003, 17:25

This is possible as a beta feature. Call your local CFX-representative for details.

Pascale

August 28, 2003, 10:29	Moving solid	#1
Jesper Guest Posts: n/a	Can anybody tell me if it's possible to model a moving solid inside a fluid domain in CFX-5.6? The actual flow situation involves the emtying of a conical shaped reservoir filled with a mixture of water and sludge particles. The reservoir is emptied by pulling a solid plug from the bottom and up into the reservoir. Regards Jesper

August 28, 2003, 17:25	Re: Moving solid	#2
Pascale Fonteijn Guest Posts: n/a	This is possible as a beta feature. Call your local CFX-representative for details. Pascale

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving Solid!	shashank312	FLUENT	3	May 4, 2021 18:58
Moving solid problem	Mudblood	FLUENT	0	June 10, 2010 13:11
how do I get a solid volume moving?	Katariina	CFX	2	March 28, 2008 05:50
solid suspension in moving liquid	Jason	FLUENT	4	October 27, 2003 19:59
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19