CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

boundry of two phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 16, 2003, 03:25
Default boundry of two phase flow
  #1
youngan
Guest
 
Posts: n/a
hi,all I have trouble to define an outlet of gas-solid two phase flow in CFX44, where gas phase can pass through while solid phase can't. How can i achieve this. I am using an euler-euler solution.
  Reply With Quote

Old   September 13, 2003, 00:39
Default Re: boundry of two phase flow
  #2
jeff
Guest
 
Posts: n/a
Youngan,

You can't inhibit one of the phases at an outlet. However, there is something in CFX-4.4 called a degassing boundary. It was originally intended to remove bubbles from the surface of a liquid tank. The tank surface is defined as a "wall" and the bubbles incident on the wall are removed with a source term while the liquid remains.

There's no reason this can't be used for your gas-solid flow. I think that the command file implementation of the degassing boundary removes phase #2, so you'll have to make sure your solids are phase #1 and that the gas is phase #2.

What do you plan to do with the solids build up at the exit? This might present a problem.

Jeff
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas-liquid 2 phase flow in microchannels using VoF LyngHoo FLUENT 1 November 13, 2012 20:01
Two Phase Darcy flow with gravity -> problem Cyp OpenFOAM Programming & Development 0 November 17, 2010 08:58
two phase flow + ice phase and breaking soeren87 OpenFOAM Running, Solving & CFD 0 September 19, 2010 11:20
Two phase flow in a distributor Mohsin FLUENT 5 May 24, 2010 03:57
low speed compressible two phase flow?? cat CFX 0 November 15, 2005 08:59


All times are GMT -4. The time now is 17:36.