CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

another unknown Pre error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2003, 07:25
Default another unknown Pre error
  #1
Louwrens
Guest
 
Posts: n/a
Anybody know what this means:

"SEVERE Operation 'writeCaseFile' failed with unrecognized exception."

and what to do about it?

It happens when I try to write a definition file from Pre.

Cheers

Louwrens
  Reply With Quote

Old   November 19, 2003, 17:36
Default Re: another unknown Pre error
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi Louwrens,

It sounds like a problem in CFX-Pre. I would contact your CFX support rep about it.

Glenn
  Reply With Quote

Old   November 20, 2003, 02:32
Default Re: another unknown Pre error
  #3
Louwrens
Guest
 
Posts: n/a
I've been having quite a few of those lately...

Problem with these type of errors are you don't know "where" to go look to try and correct it, and the message itself doesn't give any info!
  Reply With Quote

Old   November 20, 2003, 17:34
Default Re: another unknown Pre error
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi Louwrens,

If it is a problem with CFX-Pre rather than your settings then there is not much you can do about it. Make sure you have the latest CFX-Pre patch installed - they cunningly released another patch for CFX-Pre after the July 24 patch and did not tell anybody about it.

Unfortunately, CFX-Pre is a bit buggy. You may be able to find a workaround by either importing CCL code into CFX-Pre. Alternatively only using CFX-Pre for domain and BC setup and setting up everything else in a CCL file and importing it into the def file with cfx5cmds might work.

Regards, Glenn
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compile problem ivanyao OpenFOAM Running, Solving & CFD 1 October 12, 2012 10:31
UDF: DEFINE_CG_MOTION for vertical jump motion of an electrode! alban Fluent UDF and Scheme Programming 2 June 8, 2010 19:54
[swak4Foam] groovyBC: problems compiling: "flex: not found" and "undefined reference to ..." sega OpenFOAM Community Contributions 12 February 17, 2010 10:30
[OpenFOAM] Xwindows crash with paraview save srinath ParaView 1 October 15, 2008 10:37
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 21:50


All times are GMT -4. The time now is 14:35.