Loading State automatically when opening Results

Spray_Ansys · April 25, 2018, 05:11

Hi Forum!

Is there a possibility by opening a CFX .res-file to load the already saved state file into this result file, so I dont always have to load it manually? If yes, how?

Thank you in advance!

Gert-Jan · April 25, 2018, 05:23

- If you have Post open with a result and state file loaded, then why don't you just replace the existing results with a new one?
- You can edit the state file in a text editor. There, change the name of the results file with your new results file. Then open post, load the state file and confirm loading the connected results file.

This works when running Post stand alone. I don't know if it works through (Doesn't-)Workbench

Spray_Ansys · April 25, 2018, 05:25

No, sorry but you got me wrong...I looking for a way to skip always the "state file loading process", so when I open the result file, the state file gets automatically loaded at the same time...

Gert-Jan · April 25, 2018, 05:33

- When you copy the projects in Workbench, the state file is copied as well. So when open the results file, the state file will be loaded automatically.
- In Post only mode, you cannot do that. But is that too much work? First open the results file and then the state file?
- You can start post from a command line, where it loads the results file, the state file and creates a report automatically. Is that something? You could even write a batch script for it.

Spray_Ansys · April 25, 2018, 05:37

Quote:

Originally Posted by Gert-Jan

- When you copy the projects in Workbench, the state file is copied as well. So when open the results file, the state file will be loaded automatically.
- In Post only mode, you cannot do that. But is that too much work? First open the results file and then the state file?
- You can start post from a command line, where it loads the results file, the state file and creates a report automatically. Is that something? You could even write a batch script for it.

Ok, thank you for your help! I was just wondering

April 25, 2018, 05:11	Loading State automatically when opening Results	#1
Spray_Ansys Member Join Date: Mar 2018 Posts: 30 Rep Power: 8	Hi Forum! Is there a possibility by opening a CFX .res-file to load the already saved state file into this result file, so I dont always have to load it manually? If yes, how? Thank you in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Assessing steady state results for unsteady flows	siw	CFX	0	June 10, 2016 06:20
Import Steady State results to perform transient calculations	prij	FLUENT	2	March 28, 2016 15:04
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 06:27
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02
using steady state results for unsteady flow	siva appanna	Main CFD Forum	3	February 20, 2006 05:29

April 25, 2018, 05:23		#2
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,827 Rep Power: 27	- If you have Post open with a result and state file loaded, then why don't you just replace the existing results with a new one? - You can edit the state file in a text editor. There, change the name of the results file with your new results file. Then open post, load the state file and confirm loading the connected results file. This works when running Post stand alone. I don't know if it works through (Doesn't-)Workbench

April 25, 2018, 05:25		#3
Spray_Ansys Member Join Date: Mar 2018 Posts: 30 Rep Power: 8	No, sorry but you got me wrong...I looking for a way to skip always the "state file loading process", so when I open the result file, the state file gets automatically loaded at the same time...

April 25, 2018, 05:33		#4
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,827 Rep Power: 27	- When you copy the projects in Workbench, the state file is copied as well. So when open the results file, the state file will be loaded automatically. - In Post only mode, you cannot do that. But is that too much work? First open the results file and then the state file? - You can start post from a command line, where it loads the results file, the state file and creates a report automatically. Is that something? You could even write a batch script for it.