CFD Online Logo CFD Online URL
Home > Forums > CFX

CFX 5 & TASCFLOW comparison

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 21, 2004, 07:09
Default CFX 5 & TASCFLOW comparison
Posts: n/a

We are simulating a secondary flow (gas turbine leakage flow) using CFX5.6 and TASCflow. For the same BC, and same CFD model, we see a significant difference between CFX5 and TASCflow results (pressure drop). Does anybody has clue / suggestions for this issue. We have seen good comparison for statoric components. But for rotating components, this difference is seen at UD as well as higher order schemes.

Thanks in advance

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 02:20
comparison with analytical results (1D)and(3D) CFX Rogerio Fernandes Brito CFX 2 October 28, 2008 21:26
Importing solutions in CFX. Alphonso CFX 1 August 1, 2008 14:01
comparison Of CFX with FLUENT rou CFX 3 April 26, 2003 01:10
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07

All times are GMT -4. The time now is 03:46.