What should i do for (k-e)1E model activating?

April 3, 2004, 12:52

What should i do for (k-e)1E model activating? I cannont find anything from documentation.

April 13, 2004, 12:54

I think this model is only available on CFX-5.6 and it is not readable under CFX-PRE. Try this:

1. Generate the .def file with k-epsilon turbulence model under CFX-PRE. 2. In a command line inside the cfx launcher (if you´re on windows - on UNIX should be already in your $PATH var) type: <center> cfx5cmds -read -def file.def -text ccl </center>
3. Edit the ccl file 4. Switch the turbulence model from k-epsilon to Eddy Viscosity Transport Equation 5. Now store the new ccl into the def file with: <center> cfx5cmds -write -def file.def -text ccl </center>
You're done.
Enjoy! G. G.

April 14, 2004, 01:45

Gloria, Thank you very much for help. Your instructions were very helpful. Best regards, Michael

April 3, 2004, 12:52	What should i do for (k-e)1E model activating?	#1
Michael Guest Posts: n/a	What should i do for (k-e)1E model activating? I cannont find anything from documentation.

April 13, 2004, 12:54	Re: What should i do for (k-e)1E model activating?	#2
Gloria Gaynor Guest Posts: n/a	I think this model is only available on CFX-5.6 and it is not readable under CFX-PRE. Try this: 1. Generate the .def file with k-epsilon turbulence model under CFX-PRE. 2. In a command line inside the cfx launcher (if you´re on windows - on UNIX should be already in your $PATH var) type: <center> cfx5cmds -read -def file.def -text ccl </center> 3. Edit the ccl file 4. Switch the turbulence model from k-epsilon to Eddy Viscosity Transport Equation 5. Now store the new ccl into the def file with: <center> cfx5cmds -write -def file.def -text ccl </center> You're done. Enjoy! G. G.

April 14, 2004, 01:45	Re: What should i do for (k-e)1E model activating?	#3
Michael Guest Posts: n/a	Gloria, Thank you very much for help. Your instructions were very helpful. Best regards, Michael

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Centrifugal Pump and Turbulence Model	Michiel	CFX	12	January 25, 2010 03:20
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 25, 2009 23:27
help for different between les model (subgrid-scale model)	liuyuxuan	FLUENT	1	October 2, 2009 15:25
Grid resolution for full-scale and down scaled model	gravis	Main CFD Forum	0	October 2, 2009 10:27
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model	Jonas Larsson	FLUENT	5	March 13, 2000 03:27