CFD Online Logo CFD Online URL
Home > Forums > CFX

Specific heat

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 24, 2004, 09:22
Default Specific heat
Posts: n/a
I'm using 2 mass fraction equation in cfx 4.4.

If I use USRSPH routine I can only set the Cp of all the mixture? Or I can set the value of the Cp of the background fluid?


  Reply With Quote

Old   May 30, 2004, 01:55
Default Re: Specific heat
Posts: n/a
If your mass fractions are very small (ie. trace amounts) you can get away with setting the background fluid only. Otherwise, yes, you need to set the mixture CP and CPBAR. Fortunately this is easy as it is a straight mass fraction weighted summation of each component including the background fluid.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Constant velocity of the material Sas CFX 15 July 13, 2010 08:56
Simulation of a single bubble with a VOF-method Suzzn CFX 18 October 2, 2009 04:18
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 12:02

All times are GMT -4. The time now is 01:56.