CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

mesh geometry and stl?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 11, 2004, 23:35
Default mesh geometry and stl?
  #1
jemteo
Guest
 
Posts: n/a
hi,

if i import an .stl file and create a geometry in ICEM is it possible to do meshing? I've tried many times and my final mesh is only that of the geometry.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] External mesh crawls into car model. Holes in STL model? MadsR OpenFOAM Meshing & Mesh Conversion 8 October 26, 2013 11:21
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 05:24
[snappyHexMesh] Mesh a geometry without stl file eysteinn OpenFOAM Meshing & Mesh Conversion 0 May 5, 2011 11:15
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry villier OpenFOAM Meshing & Mesh Conversion 17 June 15, 2010 20:51
[Technical] How to hex mesh geometry in STL format? bigphil OpenFOAM Meshing & Mesh Conversion 9 July 6, 2009 13:29


All times are GMT -4. The time now is 07:39.