CFD Online Logo CFD Online URL
Home > Forums > CFX

Mixing-Plane-Method in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 17, 2004, 06:53
Default Mixing-Plane-Method in CFX
Posts: n/a
Could someone tell me wether CFX5 can simulate axial compressor with Mixing-Plane-Method? With which turbulence model?

  Reply With Quote

Old   August 17, 2004, 11:47
Default Re: Mixing-Plane-Method in CFX
Posts: n/a
Hi Wang,

The Stage (mixing-plane) interface model will do what you are requesting. It is fully conservative and compatible with all turbulence models, including Laminar, Zero Equation, k epsilon, RNG k epsilon, k omega, SST, DES SST, Reynolds Stress, SSG Reynolds Stress, QI Reynolds Stress, BSL Reynolds Stress, and more...

Regards, Robin
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 23 August 5, 2015 02:09
Is Particle Finite Element Method applied in CFX? WenZyn Lim CFX 0 April 6, 2011 11:47
Meshing a Mixing Plane in ICEM Will Anderson ANSYS Meshing & Geometry 2 November 9, 2010 10:16
MFR and mixing plane boundary . Mica FLUENT 0 January 26, 2007 10:39
difference in MRF and Mixing plane sam FLUENT 0 November 18, 2006 12:34

All times are GMT -4. The time now is 06:05.