 |
 |
 |
|
|
|
[Sponsors] | ||||
November 27, 2004, 11:01
|
Cavitation model
|
#1 |
|
Guest
Posts: n/a
|
Hello, I want to add or change the existing cavitation model inside CFX 5.7 or TASCFlow. Is this possible or not? thanks in advance for replay? Alaa
|
|
|
||
|
November 28, 2004, 16:45
|
Re: Cavitation model
|
#2 |
|
Guest
Posts: n/a
|
Hi ali,
Yes, you can define your own cavitation model in CFX5.7. I don't know about Tascflow. Have a look under mass transfer models in the multiphase section of the documentation. Glenn Horrocks |
|
|
|
||
|
November 29, 2004, 17:10
|
Re: Cavitation model
|
#3 |
|
Guest
Posts: n/a
|
Thank you Glenn. I hope to know about Tascflow and Cavitation modeling. Can anybody answer? I want to know which program CFX 5.7 or TASCFlow that I can use better to model cavitation? Ali
|
|
|
|
||
|
November 30, 2004, 14:15
|
Re: Cavitation model
|
#4 |
|
Guest
Posts: n/a
|
The cavitation model itself is the same in both codes, but the numerical implementations differ. I have seen cases which Tascflow has trouble with but CFX-5 does not, so I would recommend using CFX-5.
|
|
|
|
||
|
November 30, 2004, 16:08
|
Re: Cavitation model
|
#5 |
|
Guest
Posts: n/a
|
Thank you Phil....
|
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cavitation model pressure distribution | Rahmat Arazgaldy | FLUENT | 1 | May 16, 2012 15:48 |
| Cavitation model with non-isothermal flow | pitisrisuk | CFX | 0 | July 14, 2009 14:30 |
| Cavitation Model | Umesh Shah | FLUENT | 0 | June 26, 2006 17:09 |
| About Cavitation Model and General setting | wayland | Siemens | 0 | January 15, 2006 21:30 |
| Mixture Model (cavitation) | Victor | FLUENT | 3 | April 5, 2005 04:38 |
Linear Mode
