|
[Sponsors] |
December 9, 2004, 16:49 |
Transient with BSL Reynolds Stress
|
#1 |
Guest
Posts: n/a
|
Hi, I'm running into an error partway though a transient simulation that I can't figure out. I have a wall-bounded turbulent flow with an unsteadiness driven by buoyancy. I am trying to use a BSL Reynolds stress turbulence model. Despite starting nicely and running for more than 100 time-steps, it suddenly diverges and I get an "ERROR #004100018...FINMES" error. Each timestep (of 0.001 seconds) had been converging in about 6 coefficient iterations. Interestingly it fell over in different places in two identical runs (0.109 sec and 0.132 sec). I previously ran an SST turbulence model and 0.01 second timesteps without problems.
Can anyone offer any suggestions? Karl |
|
December 10, 2004, 03:52 |
Re: Transient with BSL Reynolds Stress
|
#2 |
Guest
Posts: n/a
|
Hi Karl,
Are you running with buoyancy turbulence production turned on? I think there were some issues with this. Also, what version of CFX-5 are you running? Regards, Johnson |
|
December 10, 2004, 16:42 |
Re: Transient with BSL Reynolds Stress
|
#3 |
Guest
Posts: n/a
|
I'm running 5.7 and no, I don't have buoyancy turbulence production turned on. Can you elaborate more on the issues buoyancy turbulence production?
Karl |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New implemented algebraic Reynolds stress model | volker | OpenFOAM | 13 | October 21, 2013 00:01 |
Reynolds Stress | Jade M | CFX | 4 | April 21, 2010 16:59 |
Reynolds Stress Models | Jade M | Main CFD Forum | 0 | April 21, 2010 16:38 |
Reynolds Stress Boundary Conditions | tstorm | FLUENT | 0 | July 27, 2009 14:44 |
Questions about the Reynolds stress model | empirer2002 | Main CFD Forum | 1 | January 5, 2006 07:37 |