CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

ICEMCFD to CFX5.7.1

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 9, 2005, 21:07
Default ICEMCFD to CFX5.7.1
  #1
GaryWang
Guest
 
Posts: n/a
Hi Does someone use ICEMCFD 5.0 as a mesh generator? When I finished my model in structural hex grid, I want use its output fonction to convert my grid to CFX 5.7 compatible format. But I always can not success doing that. Who can teach me how to do it ?

Gary
  Reply With Quote

Old   January 9, 2005, 21:52
Default Re: ICEMCFD to CFX5.7.1
  #2
Twiti
Guest
 
Posts: n/a
Hi Gary,

I am now going with ICEM5.1 and CFX5.7.1 and the hex mesh generation of ICEM works well. I don't know what you problem really is, maybe you should pay some attention to the error message. By the way, ICEM5.1 seems to be better than ICEM5.0.
  Reply With Quote

Old   January 9, 2005, 23:50
Default Re: ICEMCFD to CFX5.7.1
  #3
GaryWang
Guest
 
Posts: n/a
Twiti Originally, I installed ICEMCFD 5.1. But I found that ICEMCFD 5.1 can not convert its formats to some CFD solvers like CFDRC, ADINA...; it only can be transferred to ABAQUS, LS-DYNA...So, I removed ICEMCFD5.1 and install 5.0 again. In ICEMCFD 5.0, I can select different solver in "output" tag. While I have selected the solver, I do not know how to set the proper parameters in "BC" tag and "PAR" tag . Following its tutorial, there were always differences between tutorial and what I saw in my case. It's hard to keep practicing more. Anyway, Do you know the relation between the normals of surface and Hex grid formation ? Do I need to reverse each normals of surface toward the volume ?
  Reply With Quote

Old   January 11, 2005, 06:53
Default Re: ICEMCFD to CFX5.7.1
  #4
deLuther
Guest
 
Posts: n/a
You should modify shortcut for ICEM CFD 5.1 just add -cfd to the end of command line - it will start cfd version instead of fea (AI Environment). And everything will be OK. (or you can see shortcuts in ICEM 5.0 and modify 5.1 accordingly). Best regards.
  Reply With Quote

Old   January 11, 2005, 20:11
Default Re: ICEMCFD to CFX5.7.1
  #5
GaryWang
Guest
 
Posts: n/a
Thanks , deLuther .

Gary
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
a question about icemcfd ddn? George CFX 3 August 20, 2006 21:08
importing mesh from icemc icemcfd 4 to icemcfd 10 James Willie CFX 3 July 7, 2006 14:19
IcemCFD 4CFX-How to fix domain Ahmed CFX 6 March 9, 2004 19:38


All times are GMT -4. The time now is 12:12.