CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CEL error in tutorial #20

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 21, 2005, 15:30
Default CEL error in tutorial #20
  #1
Anurag
Guest
 
Posts: n/a
In tutorial 20, I am getting error while defining boundary condition 'ball". In "Mesh Motion" of boundary detail tab when "displacement y component" is set to dBallNew, it gave following errors

Bad expression value 'dBallNew' detected in parameter 'Displacement Y Component' in object '/FLOW/DOMAIN:checkValve/BOUNDARY:ball/BOUNDARY CONDITIONS/MESH MOTION'.

CEL error: Error in setting: "FFlow" via the expression: force_y()@Ball

force_y()@: read successfully, and then error found at item: Ball syntax error

Initially I created expressions individually. When it did not work i imported ValveFSI_expressions.ccl I got the same error in both cases. Has anyone got the same error? Please help me.

Anurag
  Reply With Quote

Old   January 21, 2005, 17:23
Default Re: CEL error in tutorial #20
  #2
Rui
Guest
 
Posts: n/a
Hi,

At the CEL expression, Ball indicates a boundary condition. So the boundary condition has to have exactly that name, Ball (it is case sensitive).

For what you wrote I would say that you named the boundary condition as ball (with small b), while in the CEL expression you have Ball (with a capital B).

There is a bug in CFX-5.7 related with the moving mesh capability (it was fixed in CFX-5.7.1). So if you are using CFX-5.7 and after you have managed to solve you problem, you get this error in CFX-Solver: "The CFX-5 solver could not be started, or exited with return code 255: No results file has been created", take a look at: http://www.cfd-online.com/Forum/cfx.cgi?read=9065 , and to http://www.cfd-online.com/Forum/cfx.cgi?read=9072 .

Good luck. Regards,

Rui
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tutorial for subcooled nucleate boiling Asghari FLUENT 42 December 10, 2018 12:42
Problem on Fluent Tutorial: Horizontal Film Boilig Feng FLUENT 2 April 13, 2013 06:34
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Rotor/stator tutorial, and how to... gilberto CFX 5 January 21, 2002 10:41


All times are GMT -4. The time now is 13:32.