negative heat transfer coefficient

February 25, 2005, 07:32

Hello,

Regarding the computation with conjugate heat transfer I have got negative heat transfer coefficients.

Would it be possible for someone to explain to me what happened? Since the difference of temperature determines the heat flux ,therefore, the heat transfer coefficient should be positive.

The fluid is water at 353 Kelvin, the massflow is 3 kg/s, the boundary value at the outlet is 3bar. The mesh is very fine (y+>6) and I used the SST Model.

Regards and thanks, Sigrid Andreae

February 26, 2005, 07:13

Considering your boundary conditions, I think maybe the result you got has not reach a convergency.

February 25, 2005, 07:32	negative heat transfer coefficient	#1
Sigrid Andreae Guest Posts: n/a	Hello, Regarding the computation with conjugate heat transfer I have got negative heat transfer coefficients. Would it be possible for someone to explain to me what happened? Since the difference of temperature determines the heat flux ,therefore, the heat transfer coefficient should be positive. The fluid is water at 353 Kelvin, the massflow is 3 kg/s, the boundary value at the outlet is 3bar. The mesh is very fine (y+>6) and I used the SST Model. Regards and thanks, Sigrid Andreae

February 26, 2005, 07:13	Re: negative heat transfer coefficient	#2
Twiti Guest Posts: n/a	Considering your boundary conditions, I think maybe the result you got has not reach a convergency.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
calculate heat transfer coefficient in repeated geometry	mullenc525	CFX	4	January 24, 2017 14:30
BOILING HEAT TRANSFER COEFFICIENT	John	CFX	3	April 4, 2012 17:50
Distribution of surface heat transfer coefficient along the axial direcion of a tube	andred	FLUENT	0	November 16, 2010 21:13
Flow around pipes - heat transfer coefficient on the wall of pipe	doodek	Main CFD Forum	2	November 23, 2009 08:48
No results for solid domain	Gary Holland	CFX	10	March 13, 2009 03:30