|
[Sponsors] |
March 18, 2005, 12:25 |
model validation
|
#1 |
Guest
Posts: n/a
|
Hello, all
My topic probably is too big, but it does bothered me a lot in my work. for example, if I want to model a full-scale mixing unit with several impellers, how can I validate the model. Do I must do down-scale experiments for validation? Is it possible to model a simple, literature reported mixer (just have one impeller), then use the results to validate the model? Another question is: in case if I am not able to get experiemental velocity data, is tracer test date (residence time distribution) enough for validation? Thanks for your inputs! Phil |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New implemented algebraic Reynolds stress model | volker | OpenFOAM | 13 | October 21, 2013 00:01 |
validation PaSR model | chbenz | OpenFOAM | 5 | February 8, 2011 06:30 |
species transport model or mixture model? | achaokaoyan | Main CFD Forum | 0 | July 10, 2010 10:52 |
Reynolds Stress model in CFX vs Fluent | Tim | CFX | 1 | October 7, 2009 06:19 |
Cavitation Model Validation | Neil | Main CFD Forum | 0 | January 8, 2004 08:47 |