CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

How to creat geometry like this?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 25, 2005, 13:23
Default How to creat geometry like this?
  #1
Dayanjing
Guest
 
Posts: n/a
A pipe with a plane at the middle of the pipe, a hole was in the plane, so how to creat this pipe? Thanks.
  Reply With Quote

Old   May 25, 2005, 19:30
Default Re: How to creat geometry like this?
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Sounds like simple solid modelling to me. ANSYS Workbench should be able to do it easily. Do some tutorials and it should be easy.

Regards, Glenn Horrocks
  Reply With Quote

Old   May 26, 2005, 21:04
Default Re: How to creat geometry like this?
  #3
Dayanjing
Guest
 
Posts: n/a
Thanks, could you please try one since it is so simple for you? And please let me know the major procedures. Thanks.

  Reply With Quote

Old   June 7, 2005, 07:10
Default Re: How to creat geometry like this?
  #4
Forrest
Guest
 
Posts: n/a
Ok, dayanjing, you want to do something but you don't even want to try first. If you are using DesignModeler, i'd like to tell you how to do it, it is simple, as Glenn said.

Regards, Forrest
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 05:53
Simulation of Flow through Complex 3D Geometry EmersonKB CFX 5 July 2, 2009 09:17
vitual _ real deneb FLUENT 3 January 22, 2007 05:31
How to creat the geometry of a tapered pipe? Lee Siemens 2 September 1, 2003 11:36


All times are GMT -4. The time now is 15:08.