Air Heating Up Rapidly

Metallic · January 1, 2019, 13:14

Hey guys,

I have made a transient cfx simulation consisting of two concrete slabs and air between them (with steel members too but this is irrelevant). I have defined all the materials and boundary conditions and i am heating up with temperature (time dependent) one side (wall) of the "sandwich". My problem is that after convergence post shows that actually concrete heats up at a reasonable rate that makes sense but the air in-between has unexplained crazy high temp. What am i missing? Cant find what the problem is....

I am a beginner in CFX (actually is my first simulation) coming from the mechanical background so be gentle

ghorrocks · January 2, 2019, 05:24

Is your simulation adequately converged? I strongly suspect not. Converge to a tighter tolerance. Also, for Conjugate Heat Transfer (CHT) simulations like this you should include imbalances in the convergence criteria. Residuals alone are a poor estimate of convergence for CHT simulations.

Metallic · January 16, 2019, 14:20

Hey thanks for your answer! I will check it out thoroughly during the next days and come back to you, if there is any progress.

January 1, 2019, 13:14	Air Heating Up Rapidly	#1
Metallic New Member Thomas Join Date: Jan 2019 Location: GR Posts: 4 Rep Power: 7	Hey guys, I have made a transient cfx simulation consisting of two concrete slabs and air between them (with steel members too but this is irrelevant). I have defined all the materials and boundary conditions and i am heating up with temperature (time dependent) one side (wall) of the "sandwich". My problem is that after convergence post shows that actually concrete heats up at a reasonable rate that makes sense but the air in-between has unexplained crazy high temp. What am i missing? Cant find what the problem is.... I am a beginner in CFX (actually is my first simulation) coming from the mechanical background so be gentle

January 2, 2019, 05:24		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Is your simulation adequately converged? I strongly suspect not. Converge to a tighter tolerance. Also, for Conjugate Heat Transfer (CHT) simulations like this you should include imbalances in the convergence criteria. Residuals alone are a poor estimate of convergence for CHT simulations. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Air at High Pressure	cfd seeker	FLUENT	2	September 30, 2013 14:58
Is it possible to integrate air through a system with mixture of air and water?	Hale	OpenFOAM Post-Processing	1	September 30, 2013 08:57
air distribution and heat transfer	wasim_kassel	FLUENT	0	June 24, 2013 11:12
Air to Air Heat Exchanger	visser1975	FLUENT	2	November 10, 2012 13:34
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59

January 16, 2019, 14:20		#3
Metallic New Member Thomas Join Date: Jan 2019 Location: GR Posts: 4 Rep Power: 7	Hey thanks for your answer! I will check it out thoroughly during the next days and come back to you, if there is any progress.