CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

BUILD MESH: CFX4

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 25, 2005, 07:12
Default BUILD MESH: CFX4
  #1
RK
Guest
 
Posts: n/a
Hi ALL/Anybody...

I have a very simple geometry (cylinder in a box) but tring to solve a biological problem...

I created the mesh for this geometry from Build for CFX4 (build is no longer available for me). I have 8 SCALAR VARIABLES, and when I write these variables into file only one of these variables causes some concern. The values for this one SCAL variable at periodic nodal points drops dramatically. There is no pattern as such where the values drop but it drops only in groups of 11 nodes at a time. Given that the time step is 1.0E-06s (with total simulation time to be 5.0E-06) I do not expect such drops (equates to 21% drop). Thus this seems to be related to meshing of the system...but then again can anyone explain as to why only one variable has been affected!

Many thanks,

RK

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 06:25
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38
Build mesh or fluent Josh FLUENT 4 May 18, 2004 08:53


All times are GMT -4. The time now is 04:22.