CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

how to use fluid fluid interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 13, 2005, 15:08
Default how to use fluid fluid interface
  #1
Beno
Guest
 
Posts: n/a
Hi!

I am having problems with seting up a simulation with a rotating difussor. The geometry is simple stationary cylinder and at the end of it a rotating diffusor. I created two meshes and imported them into cfx. Between the meshes there is a fluid fluid interface. If I use Stzage as the interface model I get the following error:

" ERROR #555000001 has occurred in subroutine SRF_CORRECT.

Message:

GGI intersection error: The theta extent is too small on

Domain Interface: FFinterfejs

Please examine your domain interface and look for the following:

1) surface with more than 360 degrees of revolution

2) surface intersects R=0

3) surface has faces normal AND parallel to the rotation axis

Change Transformation Type to None instead of Automatic in the

solver command file if any of the 3 situations apply. "

What does that mean? Can I even use stage model?

Should the type of the domain interface be fluid fluid or interface?

If the type periodic what does rotation or translation actually mean?

Thx in advance!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boundary conditions at Fluid Solid interface (CHT) michelle CFX 1 April 21, 2008 05:06
BC at the interface of the fluid and solid manohar Siemens 3 April 8, 2005 12:34
interface between porous and fluid rajesh kumar FLUENT 5 October 22, 2004 12:10
access to variables at interface of porous media? Mazyar FLUENT 0 October 10, 2003 15:59
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 20:40.