 |
 |
 |
|
|
|
[Sponsors] | ||||
August 1, 2005, 10:30
|
violet edges
|
#1 |
|
Guest
Posts: n/a
|
In ICEM Hexa Iīm projecting edges to curves, why donīt they get green and get violet and the projection is also wrong?
|
|
|
||
|
August 1, 2005, 14:20
|
Re: violet edges
|
#2 |
|
Guest
Posts: n/a
|
One of the options when projecting edges is something like edge-surface. Then it becomes purple. Set the edge back to projecting to surface. Then project it to the curve again - making sure the only thing selected in the pull-down is project to edge.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
| Gambit-how to create a wireframe face from so many edges? | gholamghar | ANSYS | 0 | February 18, 2011 07:22 |
| [snappyHexMesh] snappyHexMesh aborting | Tobi | OpenFOAM Meshing & Mesh Conversion | 0 | November 10, 2010 03:23 |
| [snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
Linear Mode
