|
[Sponsors] |
August 17, 2005, 10:40 |
Probems with Darcy
|
#1 |
Guest
Posts: n/a
|
I´m trying to build a system with an aniostropic porous media. (CFX 5.6)
Problem 1: Is it possible to enter in the domain options a formula for directional momentum sources such as (nx x Cx)+(ny x Cy)+(nz x Cz) (n = normal vector, C = source constant) Problem 2: The solver resets the residual to 1e-10. But with this residual the solver doesnt even calculate 10 timesteps. |
|
August 17, 2005, 18:29 |
Re: Probems with Darcy
|
#2 |
Guest
Posts: n/a
|
Hi,
I thought I was reading a Jane Austin novel for a bit there. I am not sure what source models 5.6 had, I have not used that version for many years. If the residual is 1e-10 then are you sure your fluid is even moving? Glenn Horrocks |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Darcy term | eddiegolpesar | FLUENT | 0 | August 29, 2010 07:36 |
error about solving darcy equation with mixed FEM | field | Main CFD Forum | 0 | September 10, 2007 23:08 |
confused with Darcy and Fanning | queram | Main CFD Forum | 5 | February 5, 2005 15:26 |
Darcy + multiphase? | George Bergantz | Siemens | 1 | March 14, 2002 05:07 |
Darcy | saif | Phoenics | 1 | December 8, 2000 11:40 |