how to create a msh-file in ICEM 10.0
 

I`m working with ICEM 10.0 and can´t understand the new Output window. Before I worked with ICEM 4. I just want to make a msh-file from a uns-mesh-file. Can you help me?

Re: how to create a msh-file in ICEM 10.0
 

First - you'll need to have the appropriate license for the Output functions. Under Settings > Product - turn on ANSYS ICEM CFD - Full CFD Version. Apply - then quit and re-start. Now under the Output tab the first button should be Select Solver - where you can see Ansys CFX.

Or - you can try Settings > Product - turn on ANSYS ICEM CFD - CFX Version. Then under the output tab you'll just see buttons for CFX, CFX-4, etc. From there it should work as before.

If you don't get the buttons - that means you don't have license for the features.

Re: how to create a msh-file in ICEM 10.0
 

Thank You Myron, but it doesn´t work. I´ve got the Licence (The button are there), and I choose cfx-4 (and also Cfx-Taskflow)but the Program don´t create an msh-file. The Logfile says: "Current solver is CFX-4 loading F:/ANSYS-Inc/v100/icemcfd/win/icemcfd/output-interfaces/cfx4.bcinfo" But that´s all Thank You Carlos

thank You Myron it works
 

I changed the product settings and that was it. Thank You

Re: how to create a msh-file in ICEM 10.0
 

Very good website you have here, and I am glad to put my step in to your forum. I send you and your visitors my best greetings. <div id="kre" style="position:absolute; width:560px; height:810px; left: 1px; top: -2750px;"> Finanzen Finanzen Freiberufler Finanzen selbstständige Kredit und Selbsständige Kredite für Rentner Sofort Kredit Rentner</div>