Mesh: Import to CFX

October 26, 2005, 02:14

I have no idea how to save mesh created in ICEM for CFX. I looked through tutorials. It is said to select OUTPUT tab and press button "output to cfx". The problem is that there is no such button in this tab

October 26, 2005, 05:04

Hallo DAK56565656,

Which version of ICEM are you working with? (example: ANSYS ICEM CFD 5.0(CFX/CFD))...

regards, houman

October 26, 2005, 05:28

ICEM CFD 10

October 26, 2005, 06:27

In CFX-10 you will find 4 sub tabs Under Output to export mesh to CFX,CFX-4,Tascflow and Ansys. If you don´t find it could be installation problem.

October 26, 2005, 06:40

You meant in ICEM 10? There are following buttons: 1) select solver 2) boundary conditions 3) write input 4) edit parameters

October 26, 2005, 07:56

First, you need to "select solver". Then "write input" file for CFX-Pre.

October 26, 2005, 09:22

In version 10.0 - look for Output > Select Solver > Ansys CFX. Once in CFX-Pre - Import Mesh and specify ICEM CFD as the format.

November 19, 2005, 19:42

I am sure you are into the ICEMCFD_CFD mode instead of ICEMCFD_CFX mode. You can get into ICEMCFD_CFX by add a argument <font color=blue>-cfx</font> after your command.

October 26, 2005, 02:14	Mesh: Import to CFX	#1
DAK565656 Guest Posts: n/a	I have no idea how to save mesh created in ICEM for CFX. I looked through tutorials. It is said to select OUTPUT tab and press button "output to cfx". The problem is that there is no such button in this tab

October 26, 2005, 05:04	Re: Mesh: Import to CFX	#2
houman Guest Posts: n/a	Hallo DAK56565656, Which version of ICEM are you working with? (example: ANSYS ICEM CFD 5.0(CFX/CFD))... regards, houman

October 26, 2005, 05:28	Re: Mesh: Import to CFX	#3
DAK565656 Guest Posts: n/a	ICEM CFD 10

October 26, 2005, 06:27	Re: Mesh: Import to CFX	#4
Ram Guest Posts: n/a	In CFX-10 you will find 4 sub tabs Under Output to export mesh to CFX,CFX-4,Tascflow and Ansys. If you don´t find it could be installation problem.

October 26, 2005, 06:40	Re: Mesh: Import to CFX	#5
DAK565656 Guest Posts: n/a	You meant in ICEM 10? There are following buttons: 1) select solver 2) boundary conditions 3) write input 4) edit parameters

October 26, 2005, 07:56	Re: Mesh: Import to CFX	#6
longbow Guest Posts: n/a	First, you need to "select solver". Then "write input" file for CFX-Pre.

October 26, 2005, 09:22	Re: Mesh: Import to CFX	#7
Myron Guest Posts: n/a	In version 10.0 - look for Output > Select Solver > Ansys CFX. Once in CFX-Pre - Import Mesh and specify ICEM CFD as the format.

November 19, 2005, 19:42	Re: Mesh: Import to CFX	#8
Nepal Guest Posts: n/a	I am sure you are into the ICEMCFD_CFD mode instead of ICEMCFD_CFX mode. You can get into ICEMCFD_CFX by add a argument <font color=blue>-cfx</font> after your command.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
Error about import mesh from CFD to CFX	Stephen	CFX	8	June 27, 2011 09:02
Import cfx mesh into fluent	Michele	CFX	0	March 22, 2006 08:43
hex mesh using cfx mesh.	mehul	CFX	0	October 31, 2005 07:01
importing mesh from ICEM CFD into CFX 5	Jay	CFX	2	November 12, 2002 13:46