|
[Sponsors] |
No trans simulations except Tutorial samples? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 8, 2005, 02:10 |
No trans simulations except Tutorial samples?
|
#1 |
Guest
Posts: n/a
|
Hi,
It looks like no trans simulation except examples could be run in CFX 10 The same error as earlier http://www.cfd-online.com/Forum/cfx.cgi?read=12494 in anouther task. I tried transient example - it works fine. |
|
November 10, 2005, 06:24 |
Re: No trans simulations except Tutorial samples?
|
#2 |
Guest
Posts: n/a
|
Hi there Korsh,
Have you already tried to install the CFX-10 Service Pack 1? It has just been released. If I'm not wrong I think I saw something related to this error you've got. Good luck, S. W. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem on Fluent Tutorial: Horizontal Film Boilig | Feng | FLUENT | 2 | April 13, 2013 05:34 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
Hardware selection for steady/unsteady incompressible, turbulent and cht simulations | maddalena | OpenFOAM | 2 | July 13, 2011 08:55 |
URANS and Transient Simulations | bob | Main CFD Forum | 0 | October 1, 2003 03:54 |
Rotor/stator tutorial, and how to... | gilberto | CFX | 5 | January 21, 2002 09:41 |