CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Can CFX-10 deal with ICE ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 16, 2005, 15:47
Default Can CFX-10 deal with ICE ?
  #1
Piyapong
Guest
 
Posts: n/a
Hello Can any one guide me to use CFX for simulate the air flow in cylinder as it's in intake and compression stroke? thank you.
  Reply With Quote

Old   November 16, 2005, 17:35
Default Re: Can CFX-10 deal with ICE ?
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

I've done it, and there is no way I can describe it in a forum like this. All I can say is become an experienced user of ICEM and CFX. Make sure you have each of the required features under control one at a time (moving mesh, compressible flow, valve motions, etc) and validate thoroughly before even considering a full model.

Glenn Horrocks
  Reply With Quote

Old   November 17, 2005, 07:52
Default Re: Can CFX-10 deal with ICE ?
  #3
Piyapong
Guest
 
Posts: n/a
Thank for your kind. Can I have your suggestion to set condition about compression stroke. I've modeled my piston, valve and cylinder. But I don't have idea to set the valve to completely close. It's always has a flow through a gap. Piyapong.

you can suggest me by e-mail : ballogy_2005@yahoo.com
  Reply With Quote

Old   April 7, 2010, 18:37
Exclamation Icing accreation using CFX
  #4
New Member
 
Join Date: Nov 2009
Posts: 8
Rep Power: 16
palomar is on a distinguished road
Hi all,

I have similar problem,
I can resume my experience with icing that you need to define supercooledwater dropletes in air as multiphase multiflow domain using Eulrien model / lagrangian in addition to turbulance model like SST or k-e.

The main difficulty is how to introduce water to CFX or Fluent as suppercooled droplets or as ice to calculate the quantity of ice to be accreated, and how to deal with changing geomety (mesh moving) every time a new layer of ice is formed?

We wish that someone can help us in that particular obstacle...

Good Luck
palomar is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 16:45
heat generation in CFX Ema CFX 4 August 7, 2009 06:39
Electronics Enclosure Analysis with CFX Simulation Engineer CFX 1 April 22, 2009 12:08
Good Switch deal from CFX to Fluent User who switches CFX 6 May 17, 2006 14:00
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 03:42.