CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CFX 5 Domain Interfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 4, 2005, 16:19
Default CFX 5 Domain Interfaces
  #1
Chris
Guest
 
Posts: n/a
Hello,

I am trying to model something involving both a hydrocarbon gas and air. I made my first domain the gas and the second air. When trying to create a domain interface I get multiple error messages. How do I do this properly? Do I make the air inlets openings in the first domain or leave them as part of the default? Any help would be appreciated.
  Reply With Quote

Old   December 4, 2005, 22:39
Default Re: CFX 5 Domain Interfaces
  #2
rajit
Guest
 
Posts: n/a
I reckon that will hav no effect.Your interface will be fluid-fluid interface.I cannot give you more suggestions unless you let us know what error messages you get.

Thanks Rajit
  Reply With Quote

Old   December 5, 2005, 04:50
Default Re: CFX 5 Domain Interfaces
  #3
Chirag Jayswal
Guest
 
Posts: n/a
I guess, you must have defined two different fluids for two different domains. That creates errors.

As solution to this, you need to define a common variable component mixture in material section that contains both your fluids, air & HC.

Use that mixture as fluid for both domains. For air domain make mass / volume fraction air equal to one & the same of HC equal to zero. Similarly, for HC domain make mass / volume fraction air equal to zero & the same of HC equal to one.

This may solve errors those you are getting.

Hope this helps.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to: Domain Interfaces Neusier CFX 8 March 22, 2011 07:34
ERROR #001100279 All nodes in the domain named XYZ are on interfaces. peterputer1 CFX 2 October 8, 2009 08:56
Multiple domain interfaces on a single surface mike CFX 2 January 26, 2009 18:03
CFX Fluid Domain Movement greg CFX 1 March 25, 2007 09:08
Cancel a domain in CFX solver Neser25 CFX 2 February 19, 2007 12:19


All times are GMT -4. The time now is 09:11.