Cyclone Opening boundary Conditions -- CFD Online Discussion Forums

December 16, 2005, 05:31	Cyclone Opening boundary Conditions	#1
Michael Bo Hansen Guest Posts: n/a	Hi There. Which Boundary conditions is the optimum choice of outlet/opening boundary condition for the swirling outlet of a cylone? <LI>Cartesian Velocity Components, <LI>Cylindrical Velocity Components, <LI>Opening Pressure and Direction, <LI>Opening Pressure for Entrainment, <LI>Static Pressure and Direction, <LI>Static Pressure for Entrainment? The Navier Stokes equations reveals that dP/dr = rho/r*Vteta^2 for a swirling flow, but should I implement that specifically, or can I use some of the above listed choices? Kind regards - Michael

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Impinging Jet Boundary Conditions	Anindya	Main CFD Forum	25	February 27, 2016 12:58
non reflective boundary conditions for incompresible flow	Pascal_doran	OpenFOAM Programming & Development	16	August 25, 2015 05:35
Fluent accuracy and boundary conditions	Paolo Lampitella	FLUENT	0	June 12, 2008 06:25
Opening and Static Pressure Boundary conditions	Zurayk	CFX	4	April 5, 2007 11:39
A problem about setting boundary conditions	lyang	Main CFD Forum	0	September 19, 1999 18:29

All times are GMT -4. The time now is 05:33.